R/V Sally Ride has entered a shipyard period as it ends its first year in service. Upgrades and refits will be made over the next few months. After that, it will be back to science cruises! Follow along here for photos from the shipyard, including dry dock, where the ship is set up on blocks out of the water so that the outer hull, propellers, and other areas that are usually below the waterline can be accessed. Click for larger versions. For more details about the changes being made in the shipyard, check out this post. And this one for more pictures.
-
-
Bosun Dave watches the water recede as the ship is dry docked. Photo by 2nd engineer Sue Swader.
-
-
Rear view – propellers, shafts, and rudders have all been removed. Photo by 3rd mate Randy Christian.
-
-
Water is drained from the ship’s ballast tanks. Photo by Sue Swader.
-
-
A hole is cut to modify the ship’s ballast setup. Photo by Randy Christian.
-
-
The grate is part of the bow thruster, which is used for fine-tune positioning. Photo by Sue Swader.
-
-
Stern view, with propellers and rudders visible. Photo by Sue Swader.
-
-
A technician adjusts radar. Photo by computer tech Jon Meyer.
-
-
The rudders are removed to allow removal of the propellers. Photo by Sue Swader.
-
-
Propeller and stern thruster, used for steering. Photo by Sue Swader.
-
-
Sally Ride’s propellers have been removed to allow for upgrades to the ship. Photo by Jon Meyer.
-
-
A technician adjusts radar. Photo by computer tech Jon Meyer.
-
-
Both propellers are back in place. Photo by Randy Christian.
-
-
Science systems, including a camera, on mounted to the underside of the ship. Photo by Sue Swader.
-
-
The propellers have been put back on the ship after being buffed. Photo by Randy Christian.
-
-
The grate is part of the bow thruster, which is used for fine-tune positioning. Photo by Sue Swader.
-
-
Bow view. Photo by port engineer Paul Mauricio.
-
-
Outlines of the transducers, which map the seafloor, as visible under the ship. Photo by Randy Christian.
-
-
Propeller after buffing. Photo by Randy Christian.
-
-
Shipyard workers wall over the opening from the wet lab to the starboard deck. Photo by ROV technician Doug Penny.
-
-
Restech Keith runs cables on the 02 deck, also called the Hobbit deck. Photo by Doug Penny.
-
-
The main lab has been covered in plastic in order to shield it from dust and debris while work is done. Photo by Doug Penny.